EU/UK Ship 2 Years Free Update Launch X431 PAD VII Elite PAD 7 Top Diagnostic Tool 13.3" for J2534 Reprogramming ADAS Calibration TPMS ECU Coding 60+ Services

Product Description

Launch X431 PAD VII Elite PAD 7 Diagnostic Tool Support ADAS Calibration TPMS ECU Coding 60+ Services

 

• 2 Year Free Update. EU Ship, No Tax!
• Global Version NO IP Limitation.
• New Module "MALL" is Now Available for All Users to Expand and Upgrade Their X-431 PAD VII with More Diagnosis Software.
• Multiple protocols: J2534, RP1210/D-PDU (for HD cars), Do-IP (for BMWs E/F, Land Rover/Jaguar), CANFD (like new GM).
• Online Programming for Car Brands: BMW, Mercedes, VW, Audi, Seat, Skoda, Porsche, Nissan, Infiniti, Subaru.
• Supports Australian Ford and Holden, Brazilian, Indian and Malaysian cars.
• Configuration: 13.3 inch screen + Android 9.0+ 2.0GHz Octa cores CPU+ 256GB Memory+ SmartLinc C VCI

LAUNCH X-431 PAD VII diagnostic scanner is the first intelligent one in the industry, offering a topology module mapping overview of virtually all-systems communication status. Pin detection function to detect pin volt, data rate, and protocols, OE-level bi-directional functionality, guided functions, step-by-step repair tips, DTC Analysis, Component Measurement, and Relevant Cases to improve diagnosis and repair efficiency to the greatest extent.


Launch X431 PAD VII Elite Advantages:
1. With 2 Years Free Update Online (Register after Oct 1st, 2022)
2. Support Online Programming for Car Brands: BMW, Mercedes, VW, Audi, Seat, Skoda, Porsche, Nissan, Infiniti, Subaru.
3. Support Commercial Vehicle and Passenger Car Diagnose, Support J2534, CAN FD, DoIP, J2534/D-PDU/RP1210
4. 60+ service functions: Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS
5. Guided Function for VW and AUDI (V-A-G), FCA AutoAuth Access
6. Topology mapping gives a visual checking on DTCs and all systems communication status
7. Advanced coding and programming function
8. Full System Vehicle Coverage for U.S, Asian and European markets over 110 brands, which is continually updated
9. Multi-Language Supported: English, German, Italian, French, Spanish, Portuguese, Chinese, Korean, Turkish, Swedish, Japanese, Polish, Czech, Russian, Dutch, Thai, Finnish, Danish, Romanian, Arabic, Persian, Hebrew, Croatian.
10. Support ADAS calibration Function and Eight Extended Mudule: videoscope, oscilloscope, sensor box, TPMS tools, key immobilizer and battery tester. 
11. Build-in repair information and training video modules help to track and fix issue fast.
12. Upgrade and expand the X-431 PAD VII Elite with more software and service via the new module 'MALL' as demanded

Note:
1. Launch PAD7 Elite can support Mercedes and BMW online coding and programming only in the United States, Canada and Mexico.
2. Online coding and programming functdions can't perform at all in Spain and Portugal.
3. Supports BMW, VW, Audi, Benz online coding till 2021. Adds Nissan Renault offline programming in June 2022.
4. PAD VII ADAS Calibration, you need to buy the ADAS Devices Kit. Can Not Do ADAS Calibration by PAD VII Only .
5. SmartLINK VCI remote OEM diagnosis needs purchase to activate.

Launch X431 PAD7 Functions:

• Full System Vehicle Coverage Diagnosis for U.S., Asian and European Markets Over 110 Brands, and keep updating.
• Online Programming For Benz, Bmw. Offline Programming: for VW, for Audi, Seat, Skoda, Renault, Nissan, Subaru, Hyundai, Kia, Chery, Jaguar,for Land rover, for P-orsche
• ECU Programming & Coding: J2534/RP1210/D-PDU/Do-IP/CANFD Diagnostic Protocols
• Clone Mercedes Benz ECU 2015 upwards with X431 XPROG III.
• Supports gasoline cars and diesel heavy-duty trucks (need to purchase truck software separately)
• NEW Protocols to support the vehicles of today and tomorrow: DoIP, CAN-FD, D-PDU, J2534, RP1210.
• FCA AutoAuth Access: Bypass SGM in FCA vehicles seamlessly and within seconds; *Need AutoAuth subscriptions
• Support Commercial Vehicle and Passenger Car Diagnose, Support J2534, CAN FD, DoIP.
• SmartLink 3.0 Box (also as J2534-1 & -2 Pass-thru device) allows you to refresh ECU and upgrade OE software.
• VAG Guided Function+ FCA AutoAuth Access: Bypass SGM in FCA vehicles seamlessly and within seconds; *Need AutoAuth subscriptions 
• With 60 service functions: Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS.etc
• Extended Modules:

Newly Added Functions:

New version features of PAD VII App:
The special function of ODO CHECK is added to read the mileage information in each system of the vehicle.
The special function of RESETSVIN is added to read the VIN information in each system of the vehicle.
Group chat function is added to IM.
Online download of configuration files is added to ADAS.EM 101N Oscilloscope, EM 101N Multimeter, Current Clamp and Key Programmer extension modules are added to the toolbox.
Added Indonesian and Thai language.
Optimized the topology diagram, and more than one line of function buttons above can be displayed in a drop-down way.
Optimized the Google translation problems.
Optimized the tire pressure diagnosis.
Optimize the prompts for contacting customer service on the passwordretrieval page.

X431 PAD VII Exclusive software update for Lotus Cars! 2024 Update
Exciting news! The latest and exclusive software update for Lotus Cars is here! Try it out on your X-431 PAD VII and PAD V devices or purchase the software first for other X-431 scan tools.  Check out the functions for details.

The new version of the software supports diagnostics for theLotus Cars Elise, Exige, Evora, and Eleven 2004-2022 models.covering various electronic control systems, includingEngine, Anti-lock Braking, Airbag, Instrument Panel.

FUNCTION SUPPORTED
Functions for EMS engine system include viewing versioninformation, reading DTC, clearing DTC,reading data streams.actuation tests and special functions of fuel pump control, exhaustflap control, vehicle configuration and vehicle configuration writingfor EMS (Engine System).
Functions for ABS Anti-lock Braking system include viewingversion information, reading DTC,clearing DTC,reading datastreams, actuation tests and special functions of ESP Lampactuation, brake light switch (BLS), brake bleed, steering anglesensor calibration, vehicle configuration for ABS (Anti-lock BrakingSystem).
Functions for SRS Airbag system include viewing versioninformation, reading DTC, clearing DTC, reading data streams.vehicle configuration function for SRS (Airbag System).
Functions for TPMS include viewing version information, readingDTC,clearing DTC,reading data streams, special functions ofsetting thresholds for TPMS (Tire Pressure Monitor System).
Functions for IP Instrument Panel system include speedometeroutput control and vehicle configuration for IP (Instrument Pack).


1. All System Diagnosis
Powerful all system diagnostic functions (intelligent diagnosis, read DTC, clear DTC, read data stream, actuation test), accurate diagnostic data, and abundant special functions.
Local diagnose: When the intelligent diagnosis is not available in an environment without network, choose traditional diagnosis. Select the vehicle make and model manually to perform the vehicle detection.
Real-time voltage display helps technician to monitor the voltage condition of vehicle during the diagnosis.
Intelligent diagnostic enable identify VIN automatically and access system quickly.


2. ECU Programming/ Coding
Reliable ECU Data Backup, Faster Recovery & Less Downtime

• When customizing your vehicle, there is always a question: will it be able to revert the changes in case of human error, system failure, or data loss that bricks the vehicle computer?
• This is where the "Backup/Recovery ECU Data" function can prove to be very useful.
• Unlike traditional car scanner backup methods that can be labor intensive and inconsistent, LAUNCH X431 PADVII provides a simple mechanism to back up all your ECU programming & coding data.
• It allows you to make a copy of your current Coding, Adaptations, and other info (such as Advanced ID and Live Data) of a selected control module, and save them as a file into your scan tool as a backup.
• To restore coding or programming values, just select the backup file you need and you'll effortlessly get reverted back to the old settings/coding in a control module.
• For now this function is compatible with Ben.z all series, and B.M.W F/G/I chassis.
• **NOT universally compatible. Function menus may depend on vehicle's make, model and year.

Online ECU Programming: For Benz & BMW All Chassis/Series

LAUNCH PAD VII stores the extensive programming data of Ben.z and B.M.W in the cloud server, in case of interrupted access if your hard drive has issues.

Unlike any regular scan tools on the market, this car diagnostic tool intelligently guides you through each necessary ECU programming procedure to find the solution patch, avoiding unnecessary steps, and all are presented in a user-friendly interface that is easy to learn and navigate.

• And the "Programming Backup/Restoration" function is an evolutionary smart solution designed to help you safeguard and restore the original programming data:
• It reverts the ECU data changes back to the previous state, in case of human error, system failure, or data loss that could brick the vehicle computer.
•  It allows you to create a backup of your current Values, Adaptations, and other information (such as Advanced ID and Live Data) for a specific control module, and save them into your scan tool as a backup.
• Simply select the saved historical backup record, and you'll effortlessly get reverted back to the old programming values in a control module.
• Currently this function is compatible with all series of Benz vehicles & BMW F/G/I chassis models.

Newly Upgrades for ECU Programming/Coding

• For BMW: expand ECU programming/coding, open hidden functions, modifications … options, up to 2023.
• For Benz: expand offline coding features (open hidden functions) up to 2021; supports manual programming/coding operating options to handle more repair scenarios.
• For VW/Audi: more comprehensive online calibration coding data; support subsystem mode.
• For Nissan/Infiniti: more detailed annotations for coding, e.g. the BCM of the 2018 Nissan Sentra.
• And more. Reach us to get the complete list.

J2534 ECU Programming: For More J2534-Compliant Cars

With the SmartLink C VCI Box serving as J2534-1 & -2 pass-thru device (valued at over 2000 bucks), you can easily expand your ECU programming abilities for over 30 car brands (compatible with For.d, V-W, Aud.i, Skoda, Sitter, Land Rover, Jaguar, Porsche, Renault etc.). You don't need to buy separate OE scan tools for each brand. Reminder: message us to get the "J2534 Operating Manua" for more information.

3. 60+ Maintenances Basics & Advanced Special Functions

• Guided Functions: Skip the Security Access Code & Channel Number to perform matching, calibration, and basic settings for VW / Audi / Skoda / Seat; **NO extra costs.
• Component Matching: Rematch ECU (control module unit) after the replacement for VW / Audi / Skoda / Seat / BMW / Chrysler / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc.
• Online Parameterization: Reset all adaptive data in target systems after ECU module replacement; compatible with VW / Audi / Skoda / Seat.
• Online Calibration: For some car systems' calibration; compatible with VW / Audi / Skoda / Seat.
• Online Account Login Service: Access to the login codes for coding, matching, and basic settings of all available systems.
• Programmable Module Installation (PMI): Ensure the correct software/calibration and configuration data are loaded onto the new module after replacement for Ford / Mazda.
• Power Balance: Identify the less productive cylinder for Chrysler / GM / Ford.
• Personalization: Compatible with BMW / Porsche / Toyota / Subaru.

Cover the majority of makes and models worldwide up to 2019/2020/2022 for Oil Reset, Injector Coding, Brake Reset, SAS Reset, BMS Service, ABS Bleeding, Throttle Matching, TPMS Reset, Gear Learning, AFS Reset, Gearbox, Sunroof, SUS Reset, Windows Calibration, Seats Calibration, Language Change, A/F Reset, Coolant Bleed, Transport Mode, Adblue Reset, NOx Sensor Reset NOx, Stop/Start Reset, Headlamp Fitting, Seat Matching, Door & Window Initialization Study, Air Suspension Matching, Multimedia Video Reset, Cluster Reset, Immobilizer Service, Tire Change, and more.

 FCA Secure Gateway

LAUNCH X431 PAD VII ELITE automotive diagnostic scanner provides a trustworthy authority for technicians, car dealers, automotive engineers, and service shops to undo the SGW and perform all the necessary repair procedures.

Active Test / Bidirectional Control

LAUNCH X431 PAD VII ELITE performs the active test, which bypasses the onboard control systems to send commands to modules to perform specific tests. By monitoring their responses, you can precisely locate the faults, and shorten the troubleshooting time without tearing the vehicle apart. It can:

    Rolling up / down a window;
    Turning the fuel pump on and off;
    Cycling the a/c clutch on and off;
    …

Pin Detection

This module allows you to detect the voltage of the vehicle OBD II diagnostic socket pins and the supported protocol types to help technicians judge the OBD II diagnostic interface.

Note: Before performing this function, please make sure that SmartLink C is properly connected to the vehicle's DLC port.

4. ADAS calibration Function and Extend 8 Module Functions

Optional ADAS calibration function increases more revenue.

X431 PAD VII Elite also supports 8 extended modules such as videoscope, oscilloscope, sensor box, TPMS tools, key immobilizer and battery tester. With these extended modules, technicians are available to solve high level faults with ease, to make thouse extended modules, you need to pay and buy the following extended adapters, please notice

1. X431 VSP-600 Videoscope (Mainly applied to check unseen parts of engine, fuel tank, braking system, etc.)
2. X431 TSGUN (Not only can you use it to activate the sensor's ID, tire pressure, sensor frequency, tire temperature, and battery status; you can also program sensor data to a blank LAUNCH brand sensor in three ways: Auto, Manual, and Activation Copy; at the same time, you It can be used to write the newly programmed sensor ID to the vehicle ECU.)
3. X431 X-PROG III(IMMO For VAG Group Above 3.5,advanced immobilizer & key programmer)Vehicles that require cloning are not compatible with this accessory
4. X431 ADAS Moblie/ADAS PRO (Calibrate a wide range of camera-based & radar-based driver assistance systems)
5. X431 Printer (Print out diagnostic data/reports.)
6. X431 BST360 Battery Test.(For Battery Cranking system Test, Battery Charging system Test, Battery Health Test)
7. S2-2 Sensor Box. (Designed to test and simulate most vehicle sensors. quickly troubleshooting the ECU)


5. Heavy Duty Vehicles (Need to Pay Heavy Duty License and Adpater Set)
For Nissan (Diesel)
Mitsubishi (Diesel)
USA Ford Diesel, Kenworth
Astra, Benz Heavy Duty,  Bosch Diesel, China Heavy Duty, Cummins Heavy Duty, DAF, Delphi Diesel
Denso Diesel, FAW Liberation, Foton Auman, FUSO, Hino, Hyundai Heavy Duty, Isuzu Heavy Duty
Iveco Heavy Duty, JAC Heavy Duty, Mack , MAN , OBD Heavy Duty, Scania, Shangchai Diesel, Volvo Heavy Duty
WP Diesel, Airbus, Allison Transmission Box, Ashok Rejlander, Bendix ABS, Caterpillar Heavy Duty
Chai Heavy Vehicle, Chaoyang Diesel, Construction Machinery, CREDO Heavy Vechicle, Detroit Engine
Dongfeng Commercial Vehicle, Dongfeng Yufeng, Doosan Engine, Freightliner Heavy Duty Truck
Full Diesel Diagnosis Software, Haldex ABS Heavy Duty, HD_ABS System, HD_GoldenDragon, HD_International
HD_Kinglong, HD_Maxxforce, HD_Tata, HD_Western_Star, Heavy Truck Presentation Software
IRISBUS HD, IRIZAR HD, NEOPLAN HD, Peter HD, Renault HD, SETRA HD, Stannic Bavin, Sterling HD
Sunlong Bus, Sunwin Bus, UD Trucks 2F Nissan Diesel, WABCO ABS, Yang Chai Engine

6. 99% Worldwide Cars Coverage: One Tool to Cover Almost All Cars

If you're working in a busy workshop taking care of different car models daily, you won't disappoint with this LAUNCH scanner. It works with as many vehicles and car manufacturer companies as possible.

• No IP Restriction, Use Worldwide: the LAUNCH X431 PAD VII is fully-capable to use across the world without the restrictions of using features or programs in a certain region.
• For D-PDU/J2534/RP1210 Compliant Cars: this LAUNCH X431 scanner can get more efficient communication with D-PDU & RP1210 compliant cars, covering Land Rover, Jaguar, Volvo, Toyota, GM, Honda, Nissan, BM.W, Ben.z, V-W, Hyundai, Kia, Mazda, Mitsubishi, Chrysler …
• For Commercial Vehicles with DC9-36V: after you purchase the HD software and the non-16pin HD adaptor, you can get turn this scan tool into a 12V/24V HD diagnostic scanner.
• For CAN-FD Compliant Cars: this LAUNCH X431 scanner can get access to CAN-FD (upgraded version of CAN) compliant cars: compatible with GM Models including Onix 2020-2024, Tracker 2020-2024, Suburban 2021-2024, Tahoe 2021-202.3, Montana 202.3-2024, Silverado 2024, Electra E5 2024, Escalade 2021-2024, Escalade ESV 2021-2024, Sierra 2024, Yukon 2021-202.2/2024, Yukon XL 2021-202.2/2024, and Chrysler Models including Grand Cherokee(WL) 2021-202.3, Grand Wagoneer 202.2-202.3.
• For DoIP Compliant Cars: this car scanner can also work on cars adopting DoIP protocol (a new type of protocol allowing fast & reliable communicating even over long distances). Compliant cars include Volvo, Land Rover/Jaguar, BMW F/G Chassis …
• For 2018+ FCA SGW Cars: The LAUNCH scanner can serve as the officially licensed diagnostic tool to get diagnostic access to FCA SGW-equipped cars (including but not limited to 2018-202.3 Fiat, Chrysler, Alfa Romeo, Dodge …). You’ll have the same level of control as you would with non-SGW-equipped vehicles, allowing you to perform diagnostic tasks such as code clearing, bi-directional functions, etc. Simply register with AutoAuth Services to open these capabilities.
• For 2015+ Renault SGW Cars: Once you have the Renault unlo.cking software & device, you can skip the security module and gain unrestricted access to the ECMs of 2015+ Renault RGW-equipped vehicles (including Kadjar, Megane IV, Scenic IV, Talisman, Espace V, Koleos II, Captur II …). With this access, you can carry out advanced diagnostics such as fault code reading and clearing, k.ey programming, and module replacements.

Reminder: This LAUNCH scanner comes with a built-in vehicle compatibility checking module, to help you quickly determine if a certain vehicle model is supported. You can also log in to LAUNCH website to check.

How to use Launch X-431 PAD VII?
Launch X431 PAD VII Elite User Manual
How to configure the online programming function

How to Use SmartLink C as J2534 Passthru?

Smart Link C Box
Smartlink C is a new generation intelligent diagnostic box with Linux system independently developed by Launch, which supports multiple communication modes (USB, BT, WIFI) and multiple diagnostic protocols.

* Support D-PDU / J2534 / RP1210 diagnostic standard, and cover passenger cars and commercial vehicles at the same time
* Support the latest diagnosis protocol of CAN/DOIP / CAN FD
* Support 2.4G/5G dual band
* Support online upgrade

In the SmartLink ecology system, if a technician (SmartLink C) does not have time to puzzle through a touch vehicle problem, he can seek a trusted second opinion or additional expertise on various vehicle issues from remote master technicians or repair shops (SmartLink B). SmartLink B enables the shop owner to greatly increase customer's retention and boost shop revenue by providing the professional technical assistance service.
Download the OEM diagnostic software in Automakers' Service Webs to your computer. You can reach us to get web sites.
Connect the Smartlink C to your computer with the included USB cable, or via the stable and solid 5G Wi-Fi network.
Connect the Smartlink C to your vehicle's DLC port with/without the included extended OBDII cable.
Download and install the LAUNCH's J2534 tool at the LAUNCH official site.
Run the "J2534 tool " and there you go.


Launch X431 PAD VII, PAD V and PAD III V2.0:

		Launch PAD III V2.0	Launch PAD V	Launch PAD VII Elite
Configuration
Display		10.1'' / IPS 1920*1200	10.1'' / IPS 1920*1200	13.3''  / 1920 x 1080 IPS
CPU		2.0GHz Octa-core	2.0GHz Octa-core	2.0GHz Octa-core
Memory		2 GB	4 GB	8 GB
Storage		64 GB	64 GB	256 GB
Camera		8MP Rear + 2MB Front	13MP Rear + 8MB Front	13MP Rear + 8MB Front
VCI Connector		DBScar IV	Smartbox 3.0	Smartlink C
VCI Connection		Bluetooth	2.4GHz & 5GHz dual WiFi	2.4GHz & 5GHz dual WiFi
Battery		15000mAh	9360mAh	71.1Wh (≈19000mAh)
Adjustable Supporting Holder		●	●	●
IP65 Waterproof & Dustproof			●	●
Quick Charge Technology			●	●
Charging Station			●
PUSH PUSH Design
Size (mm)		317 * 202 * 53	320 * 211 * 46	353 * 236 * 71
FEATURES
Operating System		Android™ 5.1.1	Android™ 7.1	Android™ 9.0
Full System Diagnosis		●	●	●
OBD II Full Function		●	●	●
Auto VIN Identification		●	●	●
Bi-Directional Control		●	●	●
Advanced Coding		●	●	●
VW & AUDI Guided Function		●	●	●
J2534			●	●
DoIP			●	●
RP1210/D-PDU			●	●
Advanced Programming		●	●	●
Complete TPMS Service		with X-431 TSGUN	with X-431 TSGUN	with X-431 TSGUN
Advanced Key Programming		with X-PROG 3	with X-PROG 3	with X-PROG 3
ADAS Calibration		Optional	Optional	Optional
Software Upgrade		WiFi	WiFi	WiFi
Vehicle Coverage		Passenger Cars Medium & Light Duty Vehicles Heavy Duty Vehicles (Optional)	Passenger Cars Medium & Light Duty Vehicles Heavy Duty Vehicles (Optional)	Passenger Cars Medium & Light Duty Vehicles Heavy Duty Vehicles (Optional)
Service Functions		21	26	32 by local diagnosis
SERVICE FUNCTIONS
Brake Reset		●	●	●
Oil Reset		●	●	●
SAS Reset		●	●	●
Battery Match		●	●	●
ABS Bleeding		●	●	●
Elec. Throttle RLRN		●	●	●
TPMS Reset		●	●	●
DPF Regeneration		●	●	●
Gear Learning		●	●	●
Immobilizer		●	●	●
Injector Coding		●	●	●
Sunroof Initialization		●	●	●
SUS Reset		●	●	●
AFS Reset		●	●	●
Gearbox Learning		●	●	●
Adblue Reset		●	●	●
Coolant Bleeding		●	●	●
EGR Adaption		●	●	●
Nox Sensor Reset		●	●	●
Seats Call Bration		●	●	●
Tyre Reset		●	●	●
Windows Calibration			●	●
A/F Reset			●	●
Stop/Start Reset			●	●
Transport Mode			●	●
Language Change			●	●
AC System Relearn				●
ACC Calibration				●
Engine Power Balance Monitoring				●
GPF Regeneration				●
Rotation Angle Sensor Calibration				●
High-Voltage Battery Health Detection				●
More Reset Services
Compatible Modules
X-431 ADAS PRO		●	●	●
X-431 ADAS Mobile		●	●	●
X-PROG 3  Immobilizer		●	●	●
X-PROG  Immobilizer		●	●	●
BST360 Battery Tester		●	●	●
WiFi Printer		●	●	●
X-431 TSGUN TPMS device		●	●	●
VSP600 Videoscope		●	●	●
X-431 O2-1 Osciloscope		●	●	●
X-431 S2-2 Sensorbox		●	●	●
SmartLink C 2.0 Truck		●	●	●

Launch X431 PAD VII Specification:

Operation System	Android 9.0
CPU	2.0GHz Octa cores
Memory	8GB RAM & 256GB
Display	13.3 inch capacitive screen，1920*1080
Connectivity	Bluetooth/Wi-Fi
Camera(rear)	Front 8mp, Rear 13mp
Interface	DC IN/Micro USB/USB 2.0 Type A/RJ45/HIMI
Power Consumption	≤ 2W
Test Voltage	DC 9～18V
Working Temp	0℃~50℃
Dimensions(W*H*D)	353x236x71(mm)
Smartlink
Display	3.5' touch screen 320*480
Memory	256M
Storage	8GB
Diagnostic Communication	WiFi & BT & USB

Super Hardware Configuration: Level-Up Configurations: Fast, Accurate, and Results No Delay

• 5G WiFi Communication automatically connects within 20 meters, far better than traditional BT connection in transmission rate, diagnostic
• The remarkably powerful 8-core Cortex-A53 Processor (2GHz) enhances the speed of your programming and diagnostics.
• Experience a visually stunning view with the large and Ultra-sharp 13.3" (1920*1080) Touchscreen, while the Gorilla Glass provides outstanding scratch resistance.
• Benefit from the internal 4G+64G (expandable up to 256G) onboard memory, ideal for storing materials.
• The rechargeable lithium-polymer battery with an impressive capacity of 18,720Ah enables continuous operation for up to 20 hours.
• Connect effortlessly and work from any location in the service bay, thanks to the wireless scanning capability and dual 2.4 & 5GHz Wi-Fi connection.
• The finely-tuned Android 9.0 KitKat ensures rapid boot-up in just seconds and smooth multitasking.
• IP65 Rating effectively withstands low-pressure jets of water from all directions without any harmful effects.
• 180° Adjustable Kickstand allows for more convenient viewing angles, hands-free operation, and space-saving. It also prevents the diagnostic tool from tipping over or sliding on smooth surfaces.
• Its Sleek & Lightweight Tablet-style design features a capacitive touchscreen that responds to your every gesture.

Why is the LAUNCH X431 PAD VII scan tool more powerful than other diagnostic tool?

• Saving More Time: The LAUNCH PAD Ⅶ scan tool could quickly and accurately identify problems stored in the car’s onboard memory, greatly lessening time in the garage.
• Spending Less Cost: With the Smartlink C device, LAUNCH X431 PAD Ⅶ can download OEM software to address problems such as the engine, ignition, fuel injection performance, and rpm levels, effectively preventing a small problem from developing into a more serious and more costly fault.
• Serve More Vehicles: Compatible with 30+ worldwide vehicle brands.
• Online programming tool X431PAD VII does not require an expensive online account, just connect to WIFI, saving maintenance costs.
• The smart box adopts dual WIFI communication to improve programming speed, thereby reducing the possibility of programming errors
• When using the J2534 tool, in addition to the connector, it is also necessary to consider issues such as adapting the computer, installation costs, and complete functions, which are not cost-effective.

Package includes:
1pc x carton
1pc x plastic box
1pc x PAD Ⅶ elite
1pc x Smartlink C
1pc x main cable
1pc x HDMI
1pc x USB-C
1pc x US power adaptor
1pc x OBD2 16-pin adaptor box
1pc x Non-16 Pin adaptor box
1pc x UK power adaptor
1pc x Australia power adaptor
1pc x net cable
1pc x USB printer cable
1pc x quick start guide
1pc x product S/N
1pc x packing list
3pcs x software list
1pc x manual

Kontakt: