EU/UK Ship 2 Years Free Update Launch X-431 PAD Ⅶ PAD 7 Elite + GIII X-Prog 3 Advanced Immobilizer & Key Programmer +IMMO programmer MCU3 Adapter

Product Description

Launch X-431 PAD Ⅶ PAD 7 Elite + GIII X-Prog 3 Advanced Immobilizer & Key Programmer +IMMO programmer MCU3 Adapter

Bundle Package Includes:

• X-431 PAD 7 set
• Launch GIII X-Prog 3
• MCU3 Adapter

Launch X431 PAD VII Elite Advantages:
1. With 2 Years Free Update Online
2. Support Online Programming for Car Brands: BMW, Mercedes, VW, Audi, Seat, Skoda, Porsche, Nissan, Infiniti, Subaru.
3. Support Commercial Vehicle and Passenger Car Diagnose, Support J2534, CAN FD, DoIP, J2534/D-PDU/RP1210
4. 60+ service functions: Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS
5. Guided Function for VW and AUDI (V-A-G), FCA AutoAuth Access
6. Topology mapping gives a visual checking on DTCs and all systems communication status
7. Advanced coding and programming function
8. Full System Vehicle Coverage for U.S, Asian and European markets over 110 brands, which is continually updated
9. Multi-Language Supported: English, German, Italian, French, Spanish, Portuguese, Chinese, Korean, Turkish, Swedish, Japanese, Polish, Czech, Russian, Dutch, Thai, Finnish, Danish, Romanian, Arabic, Persian, Hebrew, Croatian.
10. Support ADAS calibration Function and Eight Extended Mudule: videoscope, oscilloscope, sensor box, TPMS tools, key immobilizer and battery tester. 
11. Build-in repair information and training video modules help to track and fix issue fast.
12. Upgrade and expand the X-431 PAD VII Elite with more software and service via the new module 'MALL' as demanded

Note:
1. Launch PAD7 Elite can support Mercedes and BMW online coding and programming only in the United States, Canada and Mexico.
2. Online coding and programming functdions can't perform at all in Spain and Portugal.
3. Supports BMW, VW, Audi, Benz online coding till 2021. Adds Nissan Renault offline programming in June 2022.
4. PAD VII ADAS Calibration, you need to buy the ADAS Devices Kit. Can Not Do ADAS Calibration by PAD VII Only

Launch X431 PAD7 Functions:

• Full System Vehicle Coverage Diagnosis for U.S., Asian and European Markets Over 110 Brands, and keep updating.
• Online Programming For Benz, Bmw. Offline Programming: for VW, for Audi, Seat, Skoda, Renault, Nissan, Subaru, Hyundai, Kia, Chery, Jaguar,for Land rover, for P-orsche
• ECU Programming & Coding: J2534/RP1210/D-PDU/Do-IP/CANFD Diagnostic Protocols
• Clone Mercedes Benz ECU 2015 upwards with X431 XPROG III.
• Supports gasoline cars and diesel heavy-duty trucks (need to purchase truck software separately)
• NEW Protocols to support the vehicles of today and tomorrow: DoIP, CAN-FD, D-PDU, J2534, RP1210.
• FCA AutoAuth Access: Bypass SGM in FCA vehicles seamlessly and within seconds; *Need AutoAuth subscriptions
• Support Commercial Vehicle and Passenger Car Diagnose, Support J2534, CAN FD, DoIP.
• SmartLink 3.0 Box (also as J2534-1 & -2 Pass-thru device) allows you to refresh ECU and upgrade OE software.
• VAG Guided Function+ FCA AutoAuth Access: Bypass SGM in FCA vehicles seamlessly and within seconds; *Need AutoAuth subscriptions 
• With 60 service functions: Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS.etc
• 8 Extended Modules:

Newly Added Functions:

LAUNCH X-PROG 3 Immobilizer Programmer is a powerful chip reading and writing tool. Mainly used for reading and writing car key chip data, including EEPROM reading and writing, on-board MCU reading and writing, MB infrared key generation, special key generation, BMW engine ISN code reading, BMW cas4+ FEM chip reading and writing, etc.

Launch X-PROG 3 Advantages

• Compatible with: X431 V, X431 V+, X431 ProS, X431 PRO GT, X431 PRO V4.0, X431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
• Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
• Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
• Enables Reading/ Writing EEPROM, On-Board MCU, and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
• MCU3 Adapter to do Benz All Keys Lost and ECU TCU cloning.

Note:

• XPROG3 cannot work alone. It is strongly recommended to use with Launch Tablets Only, no other tables like Thinkcar or other models. Or devcie will get damaged easily and no warranty for this.
• X-PROG3 will connect PAD VII/PAD V/Pro5 and IMMO series (IMMO Pro/IMMO Elite/IMMO Plus) via USB, for other X431 tablets, only Bluetooth or WiFi connection.
• To clone ECU or TCU with X-PROG3, you need PAD series or IMMO tablet series tools. X431 V/V+/Pros v1.0 with X-PROG3 cannot do ECU/TCU cloning.
• Please check the Launch GIII X-Prog 3 Car List

Launch X431 GIII X-PROG 3 Functions:
1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the IMMO 4th of VW/ AUDI engine;
5. Supports ECU replacement for the IMMO 5th of VW/ AUDI Bosh and Siemens engines.
6. Supports the all lost and replacement for the IMMO 5th of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports VW/ AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
13. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
15. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
16. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).

Launch MCU3 adapter applications and advantages:
-For ADAS Advanced Driving Assist System
-For Audi VW MQB gearbox replacement
-For BMW continental msv90 engine ecu replacement and cloning
-For Peugeot Key Programming
-For Mercedes Benz transmission deleted and operating instructions vgs nag2 vgs2 nag2 and vgs3 nag2
-For Mercedes Benz w164 2009 Key Programming
-For Volkswagen Audi 5th generation engine reading engine data via direct connection and online programming and coding
-For BMW E chassis 8hp EGS deleted
-For BMW 8hp chassis F and G delete function
-Key programming cas4/cas4+ all keys lost and adding keys
-Programming cas1 cas2 cas3 cas3+ lost keys and add key
-CAS4 immobilizer module replacement
-Replacement for Volkswagen Audi engine and reading data med17 and edc17
-For Mercedes Benz med9.7 ecu deleted
-For Volkswagen Audi Replacement 4th Generation Instrument Replacement
-Engine replacement for Volkswagen Audi MED17.5.22
-Programming of lost keys and adding key for Pors-che Cayenne 2011 2017
-Cloning and virginization e39 ac delco
-Power shift cloning and virginization
-For Nissan ecu and Tcm conversion and virgin ecu programming and calibrations
-Special features for Ch-r-ysler and registration at autoauth FCA sgw
-Special features for GM and for Ford

Package Includes:
 
1set x Launch X-431 PAD VII Elite
1set x Launch GIII X-Prog 3
1pc x MCU3 Adapter Board Kit
Kontakt: