EU/UK Ship Launch X431 V+ 5.0 PRO3 Full System Diagnostic Tool with Launch GIII X-PROG3 Immobilizer Programmer

Product Description

Launch X431 V+ 5.0 Full System Diagnostic Tool with Launch GIII X-PROG3 Immobilizer Programmer

X431 V+ Update to 5.0 now, with DBScar VII !



Bundle Package Include:
1 full set Launch X431V +
1 full set X-PROG 3 Programmer

Launch X431 V+ is a typical diagnostic device contributed by Launch to diagnostic industry concerning Internet application. You can use X431 V+ to diagnose full car model and full system fault through Bluetoooth. X-PROG 3 is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 V+, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.


Launch X431 V+ V5.0 Highlights:

1. 2 Years Free Update, Global version NO IP Limit
2. Equipped with DBSCar VII now, can support CAN FD protocol
3. Supports Volkswagen Audi guidance function
4. 37+ special functions
5. Supports Topology Mapping diagnosis
6. Covers more than 98% of the cars on the market. Extensive vehicle coverage, powerful diagnostic functions, and precise test result.
7. Supports full system fault diagnosis
8. Codes reading & clearing
9. Data stream reading
10. Action testing or Bidirectional Control
11. Coding and Matching.
12. Adopts Android 10.0 System, 4-core 5GHz processor, 10.1 inch screen.
13. One-click update via Wi-Fi.
14. Multi-Languages: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkey, Dutch, Greek,Hungarian, Arabic, Denish, Korean, Farsi, Romanian, Serbian, Finish, Swedish, Czech.
15. Expansion module:

• X431 ADAS Moblie/ ADAS PRO: Calibrate a wide range of camera-based & radar-based driver assistance systems
• X431 PROG-3 Key Matching: IMMO For VAG Group Above 3.5, Vehicles that require cloning are not compatible with this accessory
• X431 Printer (Print out diagnostic data/ reports.)
• X431 BST360 battery test.(For Battery Cranking system Test, Battery Charging system Test, Battery Health Test)
• Launch VSP-600 Video Scope: Check unseen parts and give you a direct image of the engine, gears, compressors, headers and valves, and body components.
• X431 TSGUN (Not only can you use it to activate the sensor's ID, tire pressure, sensor frequency, tire temperature, and battery status.)
• X431 HDIII Heavy Duty Module or SmartLink C 2.0: Working on both heavy-duty (Class 4 through 8) and medium-duty trucks (Such as heavy trucks, city buses, bulldozers, excavators, etc.)
• Launch X431 DoIP 16Pin Cable  DBScar VII could work with Doip protocols cars such as BMW, Mercedes Benz, Land Rover, Lingke, and Volvo, it will be faster and more stable

Launch X431 V+ Function List:

New Function:

1.Variant Coding (Offline Programming): Compatible with Ford, Mazda, Vauxhall, Opel, etc.
    Variant coding is programming ECUs to meet vehicle variants, such as left-hand drive or right-hand drive. Some states/countries require the automatic activation of the headlights while driving, which results in another vehicle variant. Variant coding includes the enabling and disabling of software-driven functions.

2. Guided Functions: for Volkswagen / Audi / Skoda / Seat etc.
    Having the boot function means that you have an expert who is ideal for your repairs. It frees you from the hassle of finding automatic channel numbers and login codes. It consists of a detailed operating guide and operating instructions. For different car models, the X431 V+ scanner will provide you with specific instructions on auto-login, matching, setup and coding.

3. IMMO Keys: for Volkswagen / Audi / Skoda / Seat etc.
    Disable lost keys to prevent the car from being stolen, add new keys, and match replaced IMMO module. For more advanced IMMO programming functions, X431 V+ can use with PROG 3 key programmer.

4. Component Matching: for Volkswagen / Skoda / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc.
    This function matches and synchronizes the components with each module after you replace the module, such as Gearbox Matching / Air Suspension Matching / Seat Matching / Headlight Fitting / Door and Window Initialization Study / Sunroof Initialization / Injector Calibration / Multimedia Video Reset / Cluster Reset / Immobilizer Service / Tire Change Reset...etc.

5. ADAS Calibration:
    Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.

6. (PMI) Programmable Module Installation:
    LAUNCH X431 V+ 4.0 escaner para autos support PMI function, Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace ECU) or initialize a module.No need using the J2534 or buying a subscription.

7. Power balance Test:
    Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing, is one of the best and easiest ways to find the source of a engine misfire. Furthermore, cylinder power balance testing is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem.


8. For Audi /VW firmware protection cancel features:
    One feature most techs really want is to remove firmware protection from their cars. This feature helps mechanics replace car parts. Carry out car modifications. 9. Cylinder Balance test/Cylinder leakage test/Cylinder Pressure variations/Relative Compression Test.

Full-System Diagnoses

The diagnostic scanner X431 V+ enables you to scan full control units for a number of cars such as Engine, ABS, SAS, Transmission, Fuel system, Emission system, Body, and so on. Therefore, there is no need to buy other tools for diagnosing systems, saving you much time and money from the long term.Automatically identify VIN upon connection to the vehicle for intelligent diagnosis.Read all OTC types for full system, view, graph and record data PIDs, support bi-directional controls, actuation test and all other diagnostic functions.

Active Test & ECU Coding

Active Test
This diagnostic tool LAUNCH X431 V+ supports active test (Bi-directional control) to request information or command a module to perform specific tests and functions. For instance, in the case of OBD II generic information Mode 1, you can initiate a request for information from the powertrain control module, and the PCM responds by sending the information back to the scan tool for display. This LAUNCH X431 V+ also have the ability to actuate relays, injectors, coils, or perform system tests, etc.

• PCM (Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Gear, and more…
• Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS, and more…
• BCM (Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head-up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition. Electric Windows, and more…
• Electrical System: Centralized Control System Chassis Integrated Control and Safety System, Intelligent Body Electronic System, Communication and Information/Entertainment System.

AutoAuth Service, Access 2018+ FCA SGW Module
This car diagnostic scanner for all cars works with the smart solution “AutoAuth” for you to have the power to diagnose 2018+ FCA SGW-equipped vehicles, same capabilities as diagnosing a non-SGW-equipped vehicle like clear codes, service functions, active tests, actuation & relearns, etc., you name it.

NOTICE: 1) You must have a valid software subscription and the latest Chrysler Software installed. 2) The diagnostic scanner must be connected to the internet.

ECU Coding
Because every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. LAUNCH X431 V+ is equipped with advanced ECU coding function for addressing the following issues:
1. After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.
2. By changing the code with the ECU coding, it's easy to improve vehicle performance or stimulate high-end functions for the car.
3. ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.

37+ Special Functions:
OIL RESET– Reset the oil life systems every time the oil and oil filter are changed;
INJECTOR– Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
BRAKE RESET– Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
SAS RESET– Perform steering angle sensor calibration and clear records;
BAT.RESET– Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
BLEEDING– When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
ELEC.THROTTLE RLRN– Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;
TPMS RESET– Tire pressure resetting is required to be performed after maintenance is performed;
DPF REG– Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;
GEAR LEARN – Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced;
KEY PROGRAMMING – Help ECU to recognize the new keys when you need to add new keys.
ABS / SRS / Transmission / Engine Reset
AFS / EGR / GEARBOX / SUSPENSION / SUNROOF Reset


Auto-generated Diagnostic Report: This diagnostic tool can automatically generate a diagnostic report when your diagnostic work is successfully finished. The reports are saved in PDF format to maintain vehicle health logs.

12-in-1 Graphic Live Data: This car scanner diagnostic for all cars features a mix of visual data that makes it easy to understand wha's going on inside your vehicle.
    Each detail is presented in real-life data and live graphs of all systems including engine speed, temperature, mass air flow and such, 12-in-1, all in one screen! Imagine how fast it could be to evaluate your vehicle’s health at a glance.
 
Massive Repair Materials & Tips
Plus, you can access a vast database of repair and diagnostic tips in this bi-directional scan tool. Take a look:
    OBD Fault Code Library: explains the DTC meaning; no need to Google an unknown DTC.
    Coverage List: shows the supported functions and car systems after selecting specific vehicle make, model, and year.
    Video: the instructional videos for you to stay informed of changing technologies and refine service skills.
    Learning Materials: here you can check the repair processes relevant to specific vehicles and faults in real world. It's based on cases from millions of successful repairs.
    
LAUNCH X-PROG 3 Immobilizer Programmer is a powerful chip reading and writing tool. Mainly used for reading and writing car key chip data, including EEPROM reading and writing, on-board MCU reading and writing, MB infrared key generation, special key generation, BMW engine ISN code reading, BMW cas4+ FEM chip reading and writing, etc.

Launch X-prog3 Adds 13 VW IMMO MQB NEC35XX Types (Feb, 2024)
V11.00
1)Added the vehicle mode for the VW IMMO software.
2) Optimized the anti-theft system automatic identification function for the VW anti-theft software

V10.95
Added read and write function for a total of 48 Renesas model RH850_ encryption single-chip computer.

Added readout function for 13 VW IMMO MOB instrument,
Added IMMO readout all missing function for VW, added image zooms in/out function,
Added OBD pre-process function for BMW FEM/BDC immo system.
Optimized PIN CODE, CS code and VIN code input box function, optimized file save function, optimized online backup/restore function.

Optimized read and write function for Porsche front terminal/rear terminal electrical module,
Optimized key learning. Read-out preprocessing function for BMW FEM/BDC IMMO system;
Fixed ECU read and write function for Bosch MD1XX/MG1XX SPC main control unit,
Fixed the issue of some ME17.8.8 engine ECU not connected,
Fixed the issue of some SMART/Mercedes-Benz W204/W207/W212 steering lock not start after replacement

1) Added a total of 48 RH850_encrypted single-chip machine read and write functions
including R7F701008, R7F701011, R7F701016, R7F701021, R7F701OO9, R7F701012, R7F701017, R7F701022, R7F701026, R7F701002, R7F701010, R7F701013, R7R01018, R7F701023, R7F701027, R7F701014, R7F701019, R7F701024, R7F701028, R7F701032, R7F701040, R7F701042, R7F701044, R7F701046. R7F701050, R7F701003, R7F701015, R7F701020,R7F701025, R7F701029, R7F701033, R7F701041, R7F701043, R7F701045, R7F701047, R7F701051, R7F701030,R7F701034, R7F701048, R7F701052, R7F701054, R7F701056, R7F701006, R7F701007, R7F701049, R7F701053

2). Add a total of 13 VW IMMO MQB instrument read-out functions, including D70F3524, D70F3525_V1, D70F3525_V2, D70F3525_V3, D70F3525_V4, D70F3526_V1, D70F3526_V2, D70F3526_V3, D70F3526_V4, D70F3529, D70F3532_V1, D70F3532_V2, D70F3537

Launch X-PROG 3 Advantages

• Compatible with: X431 V, X431 V+, X431 ProS, X431 PRO GT, X431 PRO V4.0, X431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
• Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
• Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
• Enables Reading/ Writing EEPROM, On-Board MCU, and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
• You can buy MCU3 Adapter to do Benz All Keys Lost and ECU TCU cloning.

Note:

• XPROG3 cannot work alone. It is strongly recommended to use with Launch Tablets Only, no other tables like Thinkcar or other models. Or devcie will get damaged easily and no warranty for this.
• X-PROG3 will connect PAD VII/PAD V/Pro5 and IMMO series (IMMO Pro/IMMO Elite/IMMO Plus) via USB, for other X431 tablets, only Bluetooth or WiFi connection.
• To clone ECU or TCU with X-PROG3, you need PAD series or IMMO tablet series tools. X431 V/V+/Pros v1.0 with X-PROG3 cannot do ECU/TCU cloning.
• Please check the Launch GIII X-Prog 3 Car List

Launch X431 GIII X-PROG 3 Functions:
1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the IMMO 4th of VW/ AUDI engine;
5. Supports ECU replacement for the IMMO 5th of VW/ AUDI Bosh and Siemens engines.
6. Supports the all lost and replacement for the IMMO 5th of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports VW/ AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
13. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
15. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
16. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).

New Added OE-LEVEL Advanced Functions of LAUNCH X431 V+ 

Guided Functions: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Component Matching: Compatible with Volkswagen / Skoda / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc.
Online Coding: Compatible with Volkswagen / Audi / Benz / BMW / Seat / Porsche etc.
Online Account Login Service: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Online Calibration: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Power Balance: Compatible with Chrysler / GM / Ford etc.
Programmable Module Installation: Compatible with Ford / Mazda etc.
Flash Hidden Functions: Compatible with BMW / Porsche / Toyota / Subaru etc.√ Actuator Test : Injector Test ;Turn Off ACC Lane Keeping Assist

Package List:

1set x X431 V+:
1set x  Launch X-PROG3:
1pc x Launch X-PROG 3
1pc x Power adaptor
1pc x Main diagnostic cable
1pc x The fourth-generation data acquisition cable
1pc x The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc x BENCH mode cable
1pc x MCU converter V1
1pc x MCU converter V2
1pc x MCU cable with multiple leads
1pc x EEPROM chip adaptor
1pc x Benz infrared analog acquisition key
1pc x MCU cable with multiple leads
1pc x EEPROM converter
1pc x User Manual
Kontakt: