Launch X431 PRO3 V+ Elite Diagnostic Tool 10.1'' SmartLink 2.0 VCI with Launch S2-2 Sensorbox Bundle Package

Product Description

Launch X431 PRO3 V+ Elite Diagnostic Tool 10.1'' SmartLink 2.0 VCI with Launch S2-2 Sensorbox

Launch X431 PRO3 V+ Elite Diagnostic Tool 10.1'' with SmartLink 2.0

• 2 Years Free Update
• Upgraded SmartLink C adopts much more car
• ECU coding, 3000+ active tests, VAG guided functions, Topology Map
• Support CAN2.0/CANFD/DoIP new protocols
• 60+ Reset Functions
• Configuration: 10.1inch screen 1280*800+Andorid 10.0+4GB RAM+64GB RAM+6300mAh

LAUNCH X431 PRO3 V+Elite, upgrade of X431 V+5.0. Support ECU Online Coding, Topology Mapping, with Smartlink 2.0 CANFD & DOIP.


What is new features of X431 PRO3 V+Elite
1) J2534 Programming to save 500+;
2) CAN2.0/J2534/D-PDU support, CANFD/DOIP for enhanced communication;
3) Pin Detection & Pre/Post Scan;
4) Fully upgraded settings scan tool, with OBD16→DB15 for a stronger connection;
5) Major Upgrade-- Upgraded SmartLink C adopts much more cars including EV, Trucks（need to buy EV/Turck software license)



Launch X431 PRO3 V+ Elite Advantages:

• Upgraded SmartLink C 2.0 VCI
• 2 Years Free Update
• J2534 Programming is done when no band end Pr0gramming occurs, the coding data doesn't exist, or other module problems happens.
• CAN2.0/CANFD/DoIP New protocols to support: Cover for GM, for BMW E/F/G Chassis, for Jaguar, for Land Rover models, eliminate c0st for additional adapter (500+ Saving).
• Intuitive color-coded Topology Map displays structures between vehicle modules for easier analysis, serving as reference for practical repair.
• VAG guided functions
• AutoAuth Service, Access 2018+ FCA SGW Module
• Through Pin Detection, technicians can access the voltage of OBDII diagnostic socket pins and supported protocols, so as to accurately determine the status of OBDII diagnostic interface.
• 60+ Reset Functions to fix issues of injector, EPB, BMS, power balance, etc., serving for more vehicles around the world.
• D-PDU allows to access real-time ECU data, work efficiency in diagnosing and fixing faults; makes different devices compatible with each other.
• ECU coding, 3000+ active tests
• OE-level all system scan, more accurate diagnostics, and quicker car solution. All available on worldwide cars, stronger vehicle support>others.
• With one-click updates, you gain access to the latest functions and software versions, ensuring you never waste a moment of your time.
• Upgraded Hardware:4+64G memory based on Android 10.0 for more stable system running and wider compatibility, 10-inch sharp touchscreen for clear display even in sunlight, 6300mAh battery for higher power and expanded usage time, replaces OBD 16 with DB15 for stronger connection, etc.
• 25+ Language Support: English, German, Spanish, French, Traditional Chinese, Japanese, Polish language, Portuguese, Russian, Korean, Dutch, Swedish, etc. You can quickly change language settings by yourself, no need to message post-sale help
• Add Modules to Expand Features

X431 PRO3 V+ Elite Functions:

1. ECU Coding
LAUNCH X431 PRO3 V+ Elite scanner is a bi-directional scan tool that can control various sub-systems or components to perform active tests (also known as component tests) like turn fuel pump on/off, cycling the A/C Clutch on/off, EVAP test, windows, doors, sunroofs, wipers and more, to determine the integrity, monitor the operations to check whether they are functioning properly or not and quickly locate the fault causes.

• Online/Offline Coding: LAUNCH X431 PRO3 V+ Elite diagnostic scan tool has the capability of ECU coding to change preprogrammed options in the software, helping you customize your car faster as needed. Optimally code your car by changing some settings to fit your needs, such as setting alarms, doors locking, etc.
• Reflash Hidden: Access the ECU to make full use of the hidden features or disable the car’s annoying functions, like activating the auto side mirrors folding function, disabling the automatic engine Start or End function, etc. Provide excellent solutions for issues of drivability, power loss, fuel efficiency, etc. to improve the car’s performance.
• Matching: Reprogramming the adaptive data, matching and synchronizing the components for certain components after repairs or replaces the modules.

 

Please Note: ECU Coding changes preprogrammed options which depend on the type and number of electronic features already built in. Thus, ECU coding is not universally compatible and varies for different vehicles.

ECU Coding Compatibility

• Online Coding: BMW, VW, Audi, Skoda, SEAT, Porsche, etc.
• Offline Programming (Variant Coding): BENZ, Ford, Mazda, Vauxhall, Opel, etc.
• Flash Hidden Functions: Benz, BMW, VW, Audi, Skoda, SEAT, Porsche, Jeep, Dodge, Chrysler, Toyota, Honda, etc.

Power Balance Test: Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. It's one of the best and easiest ways to find the source of a engine misfire. Furthermore, cylinder power balance testing is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem.

PMI(Proarammable Module Installation): LAUNCH X431 PRO3 V+ Elite Support PMI function, Compatible with Ford /Lincoin/ Mazda etc. This function is used when you need to replace a module (replace ECU) or initialize a module.No need using the J2534 or buying a subscription.

Guided Function for VAG vehicles: LAUNCH X431 PRO3 V+ Elite car scan tool provides step-by-step repair guidance for technicians.the function of guiding the use of the product to prevent the car setting caused by wrong operation. Compatible with VAG series vehicles(V-olkswagen / Audi / Skoda / Seat etc.)

AutoAuth for FCA/ SGW: Use the latest software update function AutoAuth to provide OBDII diagnosis, active testing, calibration, etc. for modern FCA/SGW vehicles, making the diagnostics more secure.Applicable to FCA vehicles equipped with a security gateway module (SGW) in 2017 and later (NOTE: FCA Americas can be registered and used)

ACTIVE TEST (BI-DIRECTIONAL CONTROL ) : LAUNCH X431 PRO3 V+ Elite car scanner diagnostic tool Features Full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test,turn on interior & exterior lights, sound horn, test door lock actuators and such.

Topology Module Tree
LAUNCH X431 PRO3 V+ Eliet offers color-coded topology display based on actual circuits. Giving up basic graphics, this intuitive map greatly help repair by showing the vehicle topology and relationship between ECUs. One-stop service makes your diagnostics easier by accurately identifying DTCs and offering solution steps. Online videos, circuit diagrams, repair instructions, real case, etc., all in X431 FIX database to make your job 500% easier!

What Can We Do Through J2534 Programming?

• Program Blank ECU: match OE configurations with the software & settings after ECU rep1acement.
• Refresh the ECU: write new data and information into the used ECU to ensure proper running.
• Restore ECU Information: rest0re the original data if needed.
• Upgrade ECU Software: upgrade the software to the latest version.
• Through J2534, you can easily perform ECU pr0gramming for much more models (including Toyota, Honda, V.W, B.MW, F.ord, GM, Chrys1er, B.enz, etc.), getting in your bag OE functions of multiple brands.

Note: J2534 programming uses SmartLink C . Touch us to get "J2534 Operation Manual".

Why is ECU coding so important?

• To produce more payback & profit; keep more jobs in house, gain more control over the quality of repair, and increase shop capabilities.
• To recode the adaptive data for new ECU modules setup.
• To fix complex ECU-controlled issues
• To customize and advanced settings

Worry about loss of ECU data? LAUNCH offers:

• Cloud-Based Data: upload the coding data to LAUNCH cloud rather than just storing in hard disk. You'll still access to the data even if the hard disk goes wrong.
• Data Backup/Restore: create a backup of ECU data stored in the control modules, and restore the original data if needed.

Note: This feature can't work on all vehicles. Compatibility depends on the model and year of your car.

2. All System Diagnosis
LAUNCH X431 PRO3 APEX reigns supreme as the universal scan tool, adept at diagnosing all systems on 99% of vehicles traversing the roads. Experience diagnostics elevated to OE levels, enabling you to decode even the most intricate complexities that lie beneath the surface.

PCM (Drive System): Unveil the secrets of the engine, transmission, transfer case, electrical machine electronics, gear, and more.
Chassis System: Explore realms like accumulator management electronics, steering, integrated chassis management, tyre pressure control, active cruise control, braking system, suspension, TPMS, and more.
BCM (Body System): Decode the language of SR-S airbag, camera, audio radio, gateway, cluster dashboard, rain sensors, charging interface module, parking assistance, power control unit, touch box, lights, battery charging system, head-up display, wipe control system, roof, seat & door motor systems, immobilizer, AB-S ESP system, air conditioning, electric windows, and more.
Electrical System: Navigate the complexities of centralized control, chassis integrated control and safety systems, and the intelligent body electronic system, as well as communication and information/entertainment systems.


3. 60+ Reset Service

• EPB Reset (Electronic Parking Brake Reset) : After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.
• Oil Lamp Reset : Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.
• SAS Reset (Steering Angle Calibration Reset) : Learn to correct the angle and solve the problem of the steering angle of the steering wheel.
• BMS Reset (Battery Register / Battery Maintenance) : Use the power management system, the battery needs to be re-matched after the battery is replaced, so that the car computer can recognize the new battery.
• ABS Brake Bleeding : When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline. In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid.
• ETS Reset (Electronic Throttle Position Learn/Throttle Matching) : After the engine has been working for a long time, there will be serious carbon deposits in the throttle, which will affect the intake. After cleaning or replacing the throttle, the throttle opening cannot match the original ECU. This is to allow the ECU to enter Throttle learning status, let the ECU re-match the throttle opening.
• TPMS Reset (Tire Pressure Monitor System Reset) : When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle's ECU, reset tire pressure and turn off the tire pressure MIL.
• GEAR Reset (Gear Learning) : The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.
• Injector Reset (Injector Coding) : The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.
• IMMO Reset (Immobilizer) : In order to prevent the car from being used by illegal keys, the car can be opened and used normally only after the remote key is recognized and authorized by the immobilizer control system on the car through this function.
• SUS Reset (Suspension) : This function needs to be performed to level the body height sensor in the air suspension system when the body height sensor and the control module or the car is leveled incorrectly.
• AFS Reset (Adaptive Frontlighting System) : It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body.

13. GPF Regeneration (Depending on the specific car models, not for all cars ), 14. Head Light Fitting, 15. Seat Matching/Calibration, 16.Door and Window Initialization Study/Calibration, 17. Sunroof Initialization, 18. Air Suspension Matching, 19. Gearbox Matching, 20. Injector Calibration, 21. Multimedia Video Reset, 22. Cluster Reset, 23. Tire Change Reset, 24.Key Programming(Need to purchase and Match with Launch X431 PROG3), 25.Coolant Bleed, 26. NOx Sensor Reset, 27. Eng/Start Reset, 28. Transport Mode, 29. Adblue Reset, 30. A/F, 31. A/C Relearn, 32.Intelligent Cruise Control, 33. Engine Power Balance Monitoring, 34. Motor Angle Calibration, 35. High Voltage Battery Diagnostics...

How to access 100+ special functions: Brand>>System>>Module>>Special Functions

Get More Services from 1.Diagnose>>2.Car Model>>3.System>>4.Special Function


4. More Functions:

12-in-1 Graphic Live Data

• This car scanner diagnostic for all cars features a mix of visual data that makes it easy to understand what's going on inside your vehicle.
• Each detail is presented in real-life data and live graphs of all systems including engine speed, temperature, mass air flow and such, 12-in-1, all in one screen! Imagine how fast it could be to evaluate your vehicle's health at a glance.

Pre & Post Scan

• Pre & post scan documents the pre-repair and post-repair condition, providing a clear comparison to help mechanics fix problems. This feature also confirms that all pre-repair faults have been resolved and detects if new error codes generated during the repair.

Auto-generated Diagnostic Report

• This diagnostic tool can automatically generate a diagnostic report when your diagnostic work is successfully finished. The reports are saved in PDF format to maintain vehicle health logs.
• As the diagnostic scanner connects to the Wi-Fi network, the reports can be printed via a printer or directly e-mail to others, to find solutions with people who are encountering the same issue or are familiar with similar vehicle repair.
• Offer us the diagnostic reports when you are facing a complex car issues. We need this report for better data analysis.

Remote Diagnosis

• In the event you can't solve a problem, LAUNCH X431 PRO3 V+ ELITE integrates real-time online remote assistance.
• Some other automotive scanners may offer similar features, but through the unstable and expensive TeamView. While LAUNCH X431 scanner raises the standards again allowing you to ask for remote mechanic assistance via web browser, or one-for-one between two X431 users.
• It has realized the reality that a mechanic can diagnose an abnormal vehicle which is even thousands of miles away, yet faster, simpler, and more stable.

Massive Repair Materials & Tips

Vast database of repair and diagnostic tips in this bi-directional scan tool. Like:

• OBD Fault Code Library: explains the DTC meaning; no need to Google an unknown DTC.
• Coverage List: shows the supported functions and car systems after selecting specific vehicle make, model, and year.
• Video: the instructional videos for you to stay informed of changing technologies and refine service skills.
• Learning Materials: here you can check the repair processes relevant to specific vehicles and faults in real world. It's based on cases from millions of successful repairs.

Smart AutoVIN & AutoScan
Automatically skip the manual input of vehicle’s VIN code and head you towards the matched diagnostics on the system selected.

View History:
Once a vehicle diagnosis is performed, you can record/review/playback live data anytime .The History function provides quick access to the tested vehicles and users can resume from the last operation, without the necessity of starting from scratch.

X431 PRO3 V+ Elite Specification:
Processor: 2.0GHz 4-core
Operating system: Android 10.0
Memory: 4GB
Storage: 64GB
Battery: 47.880Wh (7.6V, 6300mAH)
Display: 10.1 inches 1280*800
Camera: 8 million pixels
WIFI: 2.4GHz/5GHz (dual-band)
Interface: TYPE A *1 &TYPE C*1
Working temperature: 0~50℃
Size: 274*190.5*40.5mm

SmartLink C VCI Parameters:

OS	Linux
CPU	Cortex-A7+Cortex-M7
Screen	3.6' touch screen 320*480
Memory	256M
Storage	8GB
WiFi	Dual Band 2.4GHz & 5GHz
Diagnostic Communication	Wi-Fi/ BT/ USB
Working Temperature	0℃~50℃
Dimension

Launch S2-2 Sensorbox DC USB Oscilloscope 2 Channel

1. Pad VII, Pad V

• X431 deice: X431 Pro3 APEX, PRO DYNO, PROS V5.0, X431 PRO TT, V V5.0, PRO3S+ V5.0, PRO3S+ SmartLink HD, PRO3 V+ Elite, PRO5
• PAD Series: PAD V, PAD VII
• IMMO Series: IMMO Elite, IMMO Plus
• Creader Series: CRP919X BT, CRP919E BT

• Check the ECU itself works or not
• It supports manual write the waveform data
• Simulate working condition of sensors without replacing parts
• Simulate some special working condition of sensors without replacing parts
• Be used as Multimeter to measures resistance, voltage AC/DC, capacitance, frequency and pulse signals, etc.
• One click to enters the intuitive menu of sensor, actuator, defined/drawn the waveform, timing waveform, multimeter, system settings.

Package Includes:
  S2-2 Set:
 
Kontakt: