Product Description
Launch Creader Elite 2.0 FGC Full System Diagnostic Scanner
Fit for Ford, GM, Buick Cadillac, Chevrolet, Chrysler, Dodge, Jeep
Lifetime Free Updates
Launch Creader Elite 2.0 FGC Full System Diagnostic Scanner FGC
- Free Update Lifetime
- Compatible For Buick, For Cadillac, For Chevrolet, For Chrysler, For Dodge, For Ford Europe, For Ford,For GM, For Jeep, For Lincoln, For Mazda.
- Full System Bidirectional Scanner with Full Function
- 31+ Reset Service
- Configuration: Android 8.0 System, 4'' HD touchscreen, 3000mAh Battery Capacity, 2*16GB Memory
Launch Creader Elite 2.0-BBA, FGC, are intelligent diagnostic tools for Audi/BENZ/BMW/GM on the Android platform, with full system diagnostic functions that best meet the needs of the passenger car DIY market.
Why do you choose Launch Creader Elite 2.0 FGC?
- Lifetime Free WiFI Updates: We provides wifi f-ree update with high update frequency, new features released monthly, one-Touch update via WiFi!
- Auto auth for FCA/SGW: Auto auth for FCA/SGW is designed fit for 2017 and later Chrysler / Dodge / Alfa Romeo / Jeep / Fiat vehicles. Use the latest software update feature AutoAuth to provide OBDII diagnostics, proactive testing, calibration and more for modern FCA/SGW vehicles, making diagnostics more secure. Note: FCA account registration and use available in the Americas.
- ECU Coding: It allows you to recode adaptive data for certain components after making repairs or replacements, and make the ECU recognize the replaced part. Access the ECU to make full use of the hidden features or disable the car's annoying functions, like parking assistant, A/C, and activating the auto side mirrors folding function.
- Full Bidirectional Control: LAUNCH FGC 2.0 obd2 scanner supports bidrectional control over all various vehicles components to perform active tests like EV-AP Test, Fu-el Pump Test, Cooling Fan Test, Window/Door Locks, Fu-el Trim Reset, Fuel Composition Re-set, etc.
- OE-Level Full Systems Diagnosis: One touch to Auto VIN all available systems to read/clear codes, view live data stream in graphing/text, retrieves freeze-frame, read ECU info, perform active tests to check the work status of modules like ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, etc, etc.
- Special Reset Service: LAUNCH x431 FGC 2.0 bidirectional tool fit for Ford/ GM/ Chrysler gives you the ability to use professional level relearn procedures to complete repairs or maintenance Adaptation>C-libration>Initialization>Relearn>Matching>Customization to meet your need in the most degree.
- Full OBD2 functions for All Cars: No Limit for Ford, GM,Chrysler, fit for 99% cars brands. Read/Clear Codes, Live Data, Freeze Frame, Vehicle Info., Clean the MIL, I/M readiness, O2 Sensor Test, On-Board Monitor(MODE 6), EVAP System (Mode 8), etc. Help you pass e-mi-ssions tests without going to repair shop.
- 11 Languages Menu Support of English, French, German, Spanish, Italian, Russian, Portuguese, Japanese, Korean, etc.
- More Cost-effective Features:
- (1) Massive Online Resources through google browser under new function "Code search": , you can access to online code information + Repair Cases+ Operation video + Repair Tips within reach in google browswer .
- (2) One-touch AutoVIN Technology to automatically identify make, model, and year; quickly match the car diagnostic software.
- (3) Make an in-app purchase for more functions in the "MALL" module.
- (4) Battery Test: Battery Voltage Monitor to check vehicle battery voltage status in real-time.
- (5) Automatically generate Diagnostic Report; share via Email. DTC LookUp Library.
- (6) Advanced Qualcomm Snapdragon Chip: Like the X431 V 4.0, the LAUNCH X431 FGC 2.0 also utilizes an advanced Qualcomm Snapdragon chip, which increases efficiency and makes it smoother, smarter, and more stable
Launch Creader Elite 2.0 FGC Functions:
1. Bi-Directional Control
As A Must Have Scanner Fit For Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford of Europe, Ford, GM, JEEP, Lincoln, Mazda cars (1996-2024) Owner, LAUNCH X431 FGC Elite 2.0 Automotive Diagnostic Scan Tool inherits LAUNCH X431 Series' Powerful Bi-directional Control, making it the more cost-effective LAUNCH scanner. The application of Bi-directional Control (also named Active Test, Actuator Tests, Functional Tests, Inspection Tests, System Tests or the like) improves 6X faster efficiency of problems location and diagnostic accuracy, significantly saving the mechanic/workshop time, turn the auto workshop business to fast lane.
Launch Creader Elite 2.0 fits for Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford of Europe, Ford, GM, JEEP, Lincoln, Mazda bidirectional scan tool can output the commands to ECUs to perform specific tests for checking actuator's working status. Through active tests , LAUNCH X431 Elite 2.0 PRO fits for Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford of Europe, Ford, GM, JEEP, Lincoln, Mazda obd2 scanner can precisely locate the car problems, letting you quickly know whether a specific system, component, or subsystem is functioning properly or not, which help you locate faults in the shortest time without disassembling the vehicle, saving time on troubleshooting and reducing your unnecessary maintenance costs. Making car repairs a breeze.
2. Full System Diagnosis
OE-Level Diagnoses with All-Around & In-depth Diagnoses, Make your Work Easier Ever LAUNCH Creader Elite 2.0 bidirectional scanner for FGC, works well on almost all FGC group vehicles(1994-2023), scans all available modules, providing deeper and more complete diagnostic services. Also, it can perform OE -level diagnostics to read/ clear codes, read ECU info., view Live Data, do active tests, and perform special functions for all available systems.
When a thorough diagnosis is your aim – spanning battery, steering, suspension, audio, or headlamp systems, etc. – LAUNCH Creader Elite V2.0 for GM Car brands professional scanner emerges as the ultimate choice, which can work with Buick, Cadillac, Chevrolet, GM, GMC, Alpheon, Ravon, Pontiac, Saturn, Hummer, Oldsmobile, Holden, Daewoo, Workhorse and more from 1996 to 2024 to read/ clear codes, read ECU info., view Live Data, do bidirectional control, perform special functions and etc. For all available systems, providing you with a Dealership-Level diagnosis, getting the accurate and in-depth diagnosis across all automotive systems. Smoother, Faster, More Accurate, Pinpoint System Faults in seconds.
- Retrieve ECU Information: Access control unit details like unit type, version numbers, and more, offering crucial references for repair work.
- Read/ Clear DTCs: Read fault codes to locate problems and clear the codes after certain repairs.
- Freeze Frame Analysis: Capture a snapshot of current sensor values during issues like engine misfires, aiding in diagnostics.
- Bi-directional Control: Perform Bi-directional Control to accurately figure out the work status of modules.
- Special Function: Conduct diverse daily automotive maintenance functions on specific systems, enhancing overall vehicle health.
3. Full Special Resets For Free
All free resets are in the related systems. For example, to connect 2014 Chevy Silverado, the way to use TCM's special functions should go to Diagnose>Manual Choose Model&Year>Automatically Search>System Selection> Transmission Control Module (TCM) > Special Functions, then you will be able to see the list of special functions supported by this system, There are more than 100 types of special functions for all systems combined. *Note: Special functions vary by vehicle model and year. You'd better send VIN to check compatibility first. Thank you!
With our specialized maintenance features offered for free for life, you can ensure your vehicle receives the highest level of care and precision at no extra cost. Our comprehensive toolset covers every aspect of vehicle health, from electronic parking brakes to advanced sensor calibration. Trust in our technology to maintain optimal performance and longevity for your car, giving you peace of mind on every journey, knowing that top-tier maintenance is always within reach.
- Brake Reset: After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.
- Oil Reset: Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.
- SAS Reset: Learn to correct the angle and solve the problem of the steering angle of the steering wheel.
- Battery Matching: Use the power management system, the battery needs to be re-matched after the battery is replaced, so that the car computer can recognize the new battery.
- ABS Bleeding: When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline. In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid.
- SUS Reset: This function needs to be performed to level the body height sensor in the air suspension system when the body height sensor and the control module or the car is leveled incorrectly.
- TPMS Reset: When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle's ECU, reset tire pressure and turn off the tire pressure MIL.
- GEAR Reset: The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.
- Injector Reset (Injector Coding): The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.
- AFS Reset: It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body.
- Throttle Adaptation: Initialize the throttle actuators so that the "learned" values stored on ECU are returned to the default state.
- AC System Relearn, 13. E.GR Adaption, 14. ADBlue Reset, 15. Air Level Calibration, 16. Crank/Cam Position Sensor Adaptive Learning, 17. D.PF Regeneration, 18. G.PF Regeneration, 19. Gearbox Relearn, 20. HV Battery Diagnostics, 21. NOX Sensor Reset, 22. Intelligent Cruise Control System, 23. Language Change, 24. Motor Angle Calibration, 25. Seat Occupancy Calibration, 26. Stop/Start Reset, 27. Sunroof Reset, 28. Tire Reset, 29. Transport Mode, 30. Windows Calibration, 31. Clutch Matching, 32. Turbocharging Matching, 33. Gateway Module Data Calibration, 34. ECU Reset, 35. Rainfall Light Sensor, 36. Fuel Trim Reset, 37. CAS Reset, 38. ALBBF initialization, 39. Actuator Recalibration, 40. HVAC Control Module Calibrate, 41. Engine Speed Control, 42. Fuel Trim Reset(Alcohol Content Reset), 43. Fuel Trim Enable, 44. Hybrid Control Compression T-est, 45. Cylinder Power Balance, 46. Fuel Injector Balance, 47. Crankshaft Sensors Relearn, 48. Idle learn Reset, 49. VGT Turbo Calibration, 50. Zero Point Calibration, 51. VIN Registration(Write), 52. ABS Initialization, 53. Headlamp, 54. Coolant Bleeding, etc. More Features Keep Growing...
4. Full OBD2 Modes fit for All vehicles after 1996
LAUNCH Creader Elite V2.0 OBD2 scanner for engine system with full functions of obd2.
- Data Stream View: Live data are displayed in a time-based chart to help customers to better analyze the abnormal parameter. This function will let you see engine performance information, if there are any trouble codes or issues with your engine or ECU.
- Freeze Frame Data Viewing: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. It intended to provide you with a guide as to where a fault might be occurring within a vehicle.
- O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.Accurately identifies failures of oxygen sensor and vehicle emissions related errors.
- I/M Readiness Check: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing, which is convenient to determine the vehicle’s condition.This function can help you pass SMOG TEST.
- On-board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. Which is a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light.
- EVAP System Test: Lets you initiate a leak test for the vehicle's EVAP system, that prevents fuel from evaporating out of your tank and contributing to smog. After fixed a problem with the fuel system,you can verify your fix right away, without waiting a few days (or longer) for your car to run it automatically.
- DTC Loookup: with built-in DTC library, clicking on the error code directly for definition, displaying the error code and its meaning, saving time for you to looking for the meaning of DTC on the internet.
5. What's More?
Auto VIN: Come with the latest Auto VIN Scan Technology, LAUNCH X431 Creader Elite 2.0 can quickly automatic identify vehicle information, like make, year, model and etc. No more to manually enter one by one. (*Note: AutoVIN feature does NOT work on ALL vehicles, depends on whether VIN-car ECU or not. You always can navigate your vehicle via "Diagnose>Manually Search"to perform diagnostics/services.)
DTC Help and Code Search: There are 2 ways to help you to read DTC by DTC HELP: For Example: 1. Select Health Report>Tap Enter>Check the information and tap OK>Select Read DTC>You can select "Help" or select "Code Search"; 2. Select System Selctction>Select the module you want to diagnose>Check the information and tap OK>Select Read DTC>>You can select Help or select Code Search.
4 in 1 Live Data Stream: There are 3 ways to view the data, you can choose the one that suits you best. Value–it is the default mode that displays the parameters in texts and shows them in list format. Graph–displays the parameters in waveform graphs. Combine–this is the most used in graph merge status for data comparison. In this case, different items are marked in different colors. (Combine up to 4 options)You can also record the data stream and playback the data.
DTC Library: DTC Lookup is used to search for definitions of DTCs stored in the DTC libraryand for code breaker information, and Code Breaker is used to provide descriptions of DTCs and helpful tips to deal with DTCs. It is useful for technicians to find the root cause of trouble code faster, saving diagnosis and repair time.
Online Google Search: Just one click "Code Search" after the dtc shows, save time by putting one by one.
One Click to Generate Diagnostic Report: Once the diagnostic process is successfully finished, a diagnostic report will be automatically generated and sent to your mailbox. You can download it, and then print it to share it with others.
Diagnostic History: This car diagnostic scanner records the every details of diagnostic session, provides a quick access to the tested vehicles, and enables users to choose to view the test report or resume from the last operation, without the necessity of starting from scratch, you can record/ review/ playback live data anytime.
Diagnostic Report Share & Print: All Modules Diagnosis Health Report Share & Print, so that the diagnostic reports can be printed out or sent to customers through the Internet and compared or shared with customers.
Online Feedback: LAUNCH TECH's engineers will help you troubleshoot problems. Customized exclusive beta version software for your car can be obtained here.
Launch Creader Elite 2.0 Parameter:
Parameter |
Value |
Screen |
3.97 inch |
Connector |
OBDII connector |
Android version |
Android 8.1 |
Storage |
2+16GB |
Battery |
3000mAh |
CPU |
1.3G |
Communication/Update |
WIFI 2.4Ghz (b/g/n) |
Packing size |
76*175*250mm |
Storage case size |
405*365*280mm |
Weight |
<540G |
Storage temperature |
-20~ 70 ℃ |
Working temperature |
-10 ~50 ℃ |
Package list |
Device, main cable, user manual, quick start guide |
Package List:
1 * LAUNCH CREADER Elite 2.0 Scanner
1 * OBD2 Diagnostic Cable
1 * Quick Start Guide
1 * User Manual
Kontakt: